rhinolubes

RHINO ULTRA POWER PLUS XL-IV SAE 0W20 C5 VW 508/509

Category

RHINO ULTRA POWER PLUS XL-IV SAE 0W20 C5 VW 508/509

RHINO ULTRA POWER PLUS XL-IV C5 SAE 0W-20 is a fully synthetic premium motor oil. It is designed for the latest European automotive engines, including Volkswagen and Audi, and works with both gasoline and diesel fuel systems. The oil is compatible with DPF and TWC emission reduction technologies.

Applications
RHINO ULTRA POWER PLUS XL-IV C5 SAE 0W-20 is a fully synthetic engine oil designed for use in engines with DPF and TWC emission reduction systems. It is suitable for modern VW, Audi, and Skoda gasoline and diesel engines that require VW508.00 or VW509.00 specification oil.

Features And Benefits

  • Maximum protection: RHINO POWER PLUS engine oils are formulated with the highest quality base oils and additives to ensure maximum engine protection and performance. The oil meets the latest standards of leading engine manufacturers.
  • Extended drain performance: Formulated for long-lasting performance and extended drain intervals.
  • Engine cleanliness: Minimizes deposits to keep your engine clean.
  • Wear protection: Provides maximum protection against engine wear.
  • Fuel efficiency: Low viscosity and special additives reduce friction, resulting in lower fuel consumption.

Recommendations / Specifications

International Standards: SAE 0W-20, API SN PLUS, API SP, ACEA C5, ACEA C6, ILSAC – GF-6 A

Meets or exceeds: VW 508.00 / 509.00, Porsche C20, VW TL52577, FORD -WSS-M2C956-A1

Consult the owner’s manual before use 

Typical Technical Properties

Viscosity grade, SAE J300

 

0W-20
Product Code

 

PCMO-24005
Density at 150C, g/ml, ASTM D4052

 

0.843
Cold start viscosity (CCS), mPa s, ASTM D5293

 

3800@-35⁰C
Kinematic viscosity at 40°C, mm²/s, ASTM D445

 

40.2
Kinematic viscosity at 100°C, mm²/s, ASTM D445

 

8.2
Viscosity index, ASTM D2270

 

184
Flash point (COC), °C, ASTM D92

 

232
Pour Point, °C, ASTM D97

 

-48
Total base number (TBN), mg KOH/g, ASTM D2896

 

8.3
Ash Sulphated, %wt, ASTM D874

 

0.79